
Stair Calculator
Rise, going, pitch, Part K.
Trade Tools
Lengths, sheets, less waste.
Plan cuts from stock lengths and sheet goods: lengths packed with the saw kerf to use the fewest bars, and sheet parts laid out as guillotine cuts on 2440 × 1220 boards, with grain direction and a printable layout.
How it works, a worked example and screenshots ↓
Pay once, no subscription, no ads.
Runs on your phone, no internet needed. When it is on Google Play, updates will come through Play next time you're online.
Want to know when it launches? Email forestforge.dev@gmail.com.


Cut List Optimiser takes the parts you need and works out the fewest stock lengths or sheets to buy, with the saw kerf allowed, then prints a cutting plan showing what to cut from each length and the offcut left.
Carpenters, joiners, shopfitters and anyone cutting studwork, trim, worktops or sheet material who wants less waste.
You enter
You get
Studs and noggins from 4.8 m lengths
Given
Working
Result
Order 6 lengths for 16 parts, 30 % waste (mostly reusable offcuts).
An example only: your job will differ, so check the figures against the working in the app.


A quick packing method, not a guaranteed optimum. A guide only: measure twice before cutting. The app shows its formulas and working so you can check every figure. It is not a substitute for your own judgement, training or the published standards.

Rise, going, pitch, Part K.

C16, C24, size, centres.

Length, plumb, seat, birdsmouth.