
Roof Pitch & Area
True area, rafter, ridge, hips.
Trade Tools
Even gauge, batten marks.
Split a rafter into equal courses no bigger than the tile's maximum gauge and get every batten mark from the eaves to the ridge, with a check against the minimum gauge.
How it works, a worked example and screenshots ↓
Pay once, no subscription, no ads.
Runs on your phone, no internet needed. When it is on Google Play, updates will come through Play next time you're online.
Want to know when it launches? Email forestforge.dev@gmail.com.


Batten Gauge Set-out spreads the battens evenly up the rafter between the first batten and the top batten, so every course has the same gauge and none is over the tile's maximum, and lists each batten's position from the foot of the rafter for marking a gauge rod.
Roofers setting out battens on a pitched roof.
You enter
You get
A 4.8 m rafter, 345 mm maximum gauge
Given
Working
Result
14 battens at 343.1 mm: marks at 300, 643, 986 … 4,760 mm.
An example only: your job will differ, so check the figures against the working in the app.


A guide only: check against BS 5534 and the manufacturer's data. The app shows its formulas and working so you can check every figure. It is not a substitute for your own judgement, training or the published standards.

True area, rafter, ridge, hips.

Gauge, per m², battens.

EPDM sheet, felt rolls, trims.