Trade Tools

Flat Roof Materials

EPDM sheet, felt rolls, trims.

in testingroofersiteandroid

Membrane size for a one-piece EPDM roof, or felt rolls per layer after side and end laps, with upstands, drip allowances, edge trims and deck adhesive.

How it works, a worked example and screenshots ↓

Pay once, no subscription, no ads.

Platform
Android
Version
1.0
Source
Private source · Studio product
Price
£3.99

Runs on your phone, no internet needed. When it is on Google Play, updates will come through Play next time you're online.

Want to know when it launches? Email forestforge.dev@gmail.com.

Flat Roof Materials artwork
Flat Roof Materials app screen
Screenshot from the Android app

What it does

Flat Roof Calculator works out the membrane, trims, upstands and adhesive for a flat roof in EPDM rubber, torch-on felt or GRP, with the upstands and drips added to the sheet size.

Who it's for

Roofers and builders covering garages, extensions, dormers and porches.

How to use it

  1. 1Choose EPDM, torch-on felt or GRP.
  2. 2Enter the roof length and width.
  3. 3Set each edge: wall upstand or drip trim.
  4. 4Enter the upstand height, drip turn-down and adhesive coverage.
  5. 5Read the sheet size, trims, upstands and adhesive.

Inputs and outputs

You enter

  • Membrane: EPDM, torch-on felt or GRP
  • Roof length and width (m)
  • Each long and short edge: wall upstand or drip trim
  • Upstand height and drip turn-down (m)
  • Adhesive coverage (l/m²)

You get

  • Membrane sheet size and area (or rolls for felt)
  • Edge trim length
  • Wall upstand length
  • Adhesive or resin quantity

Worked example

A 4 × 3 m garage roof in EPDM

Given

  • EPDM, 4 × 3 m, one long side against a wall
  • Upstand 150 mm, drip 75 mm
  • Deck adhesive 0.25 l/m²

Working

  1. Sheet = deck + upstand at the wall + drip at open edges
  2. = 4.150 × 3.225 m (13.38 m²)
  3. Trims on the three open edges = 10.0 m; upstand 4.0 m

Result

One 4.15 × 3.23 m EPDM sheet, 10 m of trims, 4 m upstand and 3 litres of adhesive.

An example only: your job will differ, so check the figures against the working in the app.

Features

  • EPDM, torch-on felt and GRP
  • Upstands and drips added to the sheet
  • Trims, upstands and adhesive
  • Roll count for felt layers
  • Formulas and working shown, with a clear guide-only note
  • Copy, print to PDF, export JSON or open the result in the Roofer Suite
  • Works offline, no account, no ads

Screenshots

The tool with its starting values
The tool with its starting values
Formulas, working and the results panel
Formulas, working and the results panel

Guide only

Laps and coverage vary by product. A guide only: check against the regulations and the manufacturer's data. The app shows its formulas and working so you can check every figure. It is not a substitute for your own judgement, training or the published standards.

More roofer tools

All roofer tools