Engineers Tools£14.99in testing
Engineers Tools
Nine workshop tools in one Android app.
ViewGoogle Play: in testing
Engineers Tools
Shear & Punch Tonnage
Guillotine force, punch tonnage and clearance.
coming soonshop-floorsheet-metalandroid
Shear & Punch Tonnage gives the cutting force and blade gap for a guillotine, and the punch tonnage and die clearance for round, square and slotted holes and notches in mild steel, stainless and aluminium. Offline, metric first with inch too, no ads and no account. Coming soon to Google Play.
Forces are estimates from typical shear strengths. Stay inside the machine's rated capacity.
- Guillotine cutting force and blade gap
- Punch tonnage for holes, slots and notches
- Mild steel, stainless and aluminium
- Platform
- Android
- Version
- 1.0
- Source
- Private source · Studio product
- Price
- Soon
Want to know when it launches? Email forestforge.dev@gmail.com.
Related in Engineers Tools
Whole category
Engineers Tools£3.99in testing
Gear Cut
Identify gears from teeth and OD, then cut the blank.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Bearing Fit
6000–6400 sizes and H7 seats.
ViewGoogle Play: in testing
Engineers Tools£3.99in review
Fitting ID
BSP, NPT, JIC, ORFS, ORB and metric.
ViewGoogle Play: in review
Engineers Tools£3.99in testing
Key Seat
DIN, ANSI, BS 46 and Woodruff key seats.
ViewGoogle Play: in testing
Engineers ToolsFreein testing
Limits & Fits
ISO 286 hole and shaft limits.
ViewGoogle Play: in testing · £2.99
Engineers Tools£3.99in testing
Plate Weight
Mass of plate, bar and section, with live scrap prices.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Sheet Fold: Bend & Pattern
Bend, pattern, box, roll and develop.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Thread Cut
Pitches, tap drills, compare and identify.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Weld Setup
Starting amps, volts, wire and gas.
ViewGoogle Play: in testing
Engineers Toolscoming soon
Belt & Pulley
Ratios, belt lengths, centres and belt sections.
Engineers Toolscoming soon
Chain & Sprocket
Chain sizes, sprocket PCD, links and centres.
Engineers Toolscoming soon
Coolant Mix
Refractometer readings, mixing and top-ups.
Engineers Toolscoming soon
Drawing Symbols
GD&T and ISO GPS symbols in plain English.
Engineers Toolscoming soon
Fastener Torque
Tightening torque and preload, metric and UNC/UNF.
Engineers Toolscoming soon
Hardness Convert
HRC, HRB, HV, Brinell and Shore conversions.
Engineers Toolscoming soon
Heat Treat & Temper Colours
Hardening and tempering for common steels.
Engineers Toolscoming soon
Job Timer & Quote
Time jobs, cost them and quote, offline.
Engineers Toolscoming soon
Lifting & Slings
Sling angles, leg loads, WLL and shackles.
Engineers Toolscoming soon
O-Ring & Seal ID
Measure a worn O-ring, find the size.
Engineers Toolscoming soon
Offcut Rack
Leftover plate, bar and tube, and find a piece.
Engineers Toolscoming soon
Pipe Cut
Offsets, mitres, copes and wrap templates.
Engineers Toolscoming soon
Shaft Align
Reverse rim and rim-and-face, with shims.
Engineers Toolscoming soon
Shop Plant Log
Service log, hours, next due and reminders.
Engineers Tools£3.99coming soon
Shop Print: Measure Drawings
Measure a drawing at the machine when the office is out.
Engineers Toolscoming soon
Sine Bar & Slip Gauges
Gauge heights and slip gauge stacks for an angle.
Engineers Toolscoming soon
Spring Calc
Compression and extension spring rate and stress.
Engineers Toolscoming soon
Surface Finish
Ra, Rz, N grades, CLA and turned finish.
Engineers Toolscoming soon
Taper ID
Morse, Jacobs, R8, 7:24 and metric tapers.
Engineers Toolscoming soon
Weld Metal & Joint Size
Throat, leg, weld metal and wire or rod.