Engineers Tools£14.99in testing
Engineers Tools
Nine workshop tools in one Android app.
ViewGoogle Play: in testing
Engineers Tools
Taper ID
Morse, Jacobs, R8, 7:24 and metric tapers.
coming soonshop-floorlatheandroid
Taper ID identifies Morse, Jacobs, R8, 7:24 steep and metric tapers from measured diameters, shows their sizes, and gives the compound angle or tailstock set-over to cut one. Offline, metric first with inch too, no ads and no account. Coming soon to Google Play.
- Identify a taper from two diameters
- Morse, Jacobs, R8, 7:24 and metric sizes
- Compound angle and tailstock set-over
- Platform
- Android
- Version
- 1.0
- Source
- Private source · Studio product
- Price
- Soon
Want to know when it launches? Email forestforge.dev@gmail.com.
Related in Engineers Tools
Whole category
Engineers Tools£3.99in testing
Gear Cut
Identify gears from teeth and OD, then cut the blank.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Bearing Fit
6000–6400 sizes and H7 seats.
ViewGoogle Play: in testing
Engineers Tools£3.99in review
Fitting ID
BSP, NPT, JIC, ORFS, ORB and metric.
ViewGoogle Play: in review
Engineers Tools£3.99in testing
Key Seat
DIN, ANSI, BS 46 and Woodruff key seats.
ViewGoogle Play: in testing
Engineers ToolsFreein testing
Limits & Fits
ISO 286 hole and shaft limits.
ViewGoogle Play: in testing · £2.99
Engineers Tools£3.99in testing
Plate Weight
Mass of plate, bar and section, with live scrap prices.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Sheet Fold: Bend & Pattern
Bend, pattern, box, roll and develop.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Thread Cut
Pitches, tap drills, compare and identify.
ViewGoogle Play: in testing
Engineers Tools£3.99in testing
Weld Setup
Starting amps, volts, wire and gas.
ViewGoogle Play: in testing
Engineers Toolscoming soon
Belt & Pulley
Ratios, belt lengths, centres and belt sections.
Engineers Toolscoming soon
Chain & Sprocket
Chain sizes, sprocket PCD, links and centres.
Engineers Toolscoming soon
Coolant Mix
Refractometer readings, mixing and top-ups.
Engineers Toolscoming soon
Drawing Symbols
GD&T and ISO GPS symbols in plain English.
Engineers Toolscoming soon
Fastener Torque
Tightening torque and preload, metric and UNC/UNF.
Engineers Toolscoming soon
Hardness Convert
HRC, HRB, HV, Brinell and Shore conversions.
Engineers Toolscoming soon
Heat Treat & Temper Colours
Hardening and tempering for common steels.
Engineers Toolscoming soon
Job Timer & Quote
Time jobs, cost them and quote, offline.
Engineers Toolscoming soon
Lifting & Slings
Sling angles, leg loads, WLL and shackles.
Engineers Toolscoming soon
O-Ring & Seal ID
Measure a worn O-ring, find the size.
Engineers Toolscoming soon
Offcut Rack
Leftover plate, bar and tube, and find a piece.
Engineers Toolscoming soon
Pipe Cut
Offsets, mitres, copes and wrap templates.
Engineers Toolscoming soon
Shaft Align
Reverse rim and rim-and-face, with shims.
Engineers Toolscoming soon
Shear & Punch Tonnage
Guillotine force, punch tonnage and clearance.
Engineers Toolscoming soon
Shop Plant Log
Service log, hours, next due and reminders.
Engineers Tools£3.99coming soon
Shop Print: Measure Drawings
Measure a drawing at the machine when the office is out.
Engineers Toolscoming soon
Sine Bar & Slip Gauges
Gauge heights and slip gauge stacks for an angle.
Engineers Toolscoming soon
Spring Calc
Compression and extension spring rate and stress.
Engineers Toolscoming soon
Surface Finish
Ra, Rz, N grades, CLA and turned finish.
Engineers Toolscoming soon
Weld Metal & Joint Size
Throat, leg, weld metal and wire or rod.