
Engineers Tools
Nine workshop tools in one Android app.
Engineers Tools
Speeds, feeds and notes, by job and material.
The speeds and feeds that worked on a job used to live on a worn card in the toolbox — Cutting Data Log keeps them on the phone, with a quick RPM helper, and you can export the list.
Figures you type are yours; this is not a recommended-speeds chart. Your log stays on this phone: export a copy now and then.
Pay once, no subscription, no ads.
Runs on your phone, no internet needed. When it is on Google Play, updates will come through Play next time you're online.
Want to know when it launches? Email forestforge.dev@gmail.com.



Nine workshop tools in one Android app.

Identify gears from teeth and OD, then cut the blank.

6000–6400 sizes and H7 seats.

BSP, NPT, JIC, ORFS, ORB and metric.

DIN, ANSI, BS 46 and Woodruff key seats.

ISO 286 hole and shaft limits.

Mass of plate, bar and section, with live scrap prices.

Bend, pattern, box, roll and develop.

Pitches, tap drills, compare and identify.

Starting amps, volts, wire and gas.

Tool air use, receiver size and pipe pressure drop.

A rough bending and deflection check for common sections.

Ratios, belt lengths, centres and belt sections.

Clamp load, bolt stretch, torque, grade and lubrication.

Dial divisions for a bore size, and a bar overhang check.

Chain sizes, sprocket PCD, links and centres.

Tool offsets for chamfers, corner radii and a chamfer mill.

Refractometer readings, mixing and top-ups.

Cap-screw counterbores, countersinks and clearance holes.

Simple, angular and differential indexing.

GD&T and ISO GPS symbols in plain English.

Frame and bar cut lists, mitre angles, kerf and stock.

Tightening torque and preload, metric and UNC/UNF.

Weld metal, wire or rod to buy, and shielding gas.

Span over teeth and measurement over pins.

Surface speed, maximum RPM and dressing starting points.

HRC, HRB, HV, Brinell and Shore conversions.

Hardening and tempering for common steels.

PCD, grid and slot coordinates for a DRO.

Push and pull force, speed, flow and stroke volume.

Time jobs, cost them and quote, offline.

Parallel keys, keyways and straight-sided splines.

Blank diameters that track, for form and cut knurls.

Change-gear trains for metric and imperial threads.

Sling angles, leg loads, WLL and shackles.

Weight and job price for plate, bar and tube.

Measure a worn O-ring, find the size.

Leftover plate, bar and tube, and find a piece.

Offsets, mitres, copes and wrap templates.

Interference, press force and a hub stress check.

Velocity, pressure loss and a rough pump head.

Rack travel, worm ratio, centre distance and efficiency.

Handwheel turns, equally spaced holes and arc milling.

Real sizes from a scale rule, a known dimension or a photo.

Reverse rim and rim-and-face, with shims.

Guillotine force, punch tonnage and clearance.

Service log, hours, next due and reminders.

Measure a drawing at the machine when the office is out.

Gauge heights and slip gauge stacks for an angle.

Sine plate height, and tilt and rotation for a compound angle.

Cutting power and torque for turning and milling.

Compression and extension spring rate and stress.

Ra, Rz, N grades, CLA and turned finish.

Tap drills for metric, UNC, UNF, BSP and BSW.

Morse, Jacobs, R8, 7:24 and metric tapers.

Tailstock set-over and compound-slide angle.

Length and diameter growth, and shrink-fit temperatures.

Best-wire size and measurement over three wires.

Taylor tool life and a plan for insert changes.

Throat, leg, weld metal and wire or rod.