Engineers Tools

Sine Plate & Compound Angles

Sine plate height, and tilt and rotation for a compound angle.

in testingshop-floorinspectionandroid

Setting a compound angle on a sine plate used to mean a pair of workshop identities and a careful sketch — this app gives the gauge height, and the tilt and rotation from the two plane angles.

Compound-angle formulae are the usual workshop identities for a plane or a hole at an angle to two square faces. Slip-gauge stacks are not built here (see Sine Bar & Slip Gauges). Check the plate's centre distance.

  • Gauge height for an angle on a sine plate
  • Tilt and rotation from the two plane angles, or the two plane angles from a tilt and a rotation
  • Stacked-plate angles, where the second angle is set in the already-tilted plane

Pay once, no subscription, no ads.

Platform
Android
Version
1.0
Source
Private source · Studio product
Price
Soon

Runs on your phone, no internet needed. When it is on Google Play, updates will come through Play next time you're online.

Want to know when it launches? Email forestforge.dev@gmail.com.

Sine Plate & Compound Angles artwork
Sine Plate & Compound Angles app screen
Screenshot from the Android app

Related in Engineers Tools

Whole category
Engineers Tools artwork
Engineers Tools£14.99in testing

Engineers Tools

Nine workshop tools in one Android app.

ViewGoogle Play: in testing
Gear Cut artwork
Engineers Tools£3.99in testing

Gear Cut

Identify gears from teeth and OD, then cut the blank.

ViewGoogle Play: in testing
Fitting ID artwork
Engineers Tools£3.99live

Fitting ID

BSP, NPT, JIC, ORFS, ORB and metric.

Key Seat artwork
Engineers Tools£3.99in testing

Key Seat

DIN, ANSI, BS 46 and Woodruff key seats.

ViewGoogle Play: in testing
Plate Weight artwork
Engineers Tools£3.99in testing

Plate Weight

Mass of plate, bar and section, with live scrap prices.

ViewGoogle Play: in testing
Thread Cut artwork
Engineers Tools£3.99live

Thread Cut

Pitches, tap drills, compare and identify.

Weld Setup artwork
Engineers Tools£3.99in testing

Weld Setup

Starting amps, volts, wire and gas.

ViewGoogle Play: in testing
Air & Compressor artwork
Engineers Toolsin testing

Air & Compressor

Tool air use, receiver size and pipe pressure drop.

Beam & Bracket artwork
Engineers Toolsin testing

Beam & Bracket

A rough bending and deflection check for common sections.

Belt & Pulley artwork
Engineers Toolsin testing

Belt & Pulley

Ratios, belt lengths, centres and belt sections.

Bolt Preload artwork
Engineers Toolsin testing

Bolt Preload

Clamp load, bolt stretch, torque, grade and lubrication.

Boring Head artwork
Engineers Toolsin testing

Boring Head

Dial divisions for a bore size, and a bar overhang check.

Chain & Sprocket artwork
Engineers Toolsin testing

Chain & Sprocket

Chain sizes, sprocket PCD, links and centres.

Chamfer & Radius artwork
Engineers Toolsin testing

Chamfer & Radius

Tool offsets for chamfers, corner radii and a chamfer mill.

Coolant Mix artwork
Engineers Toolsin testing

Coolant Mix

Refractometer readings, mixing and top-ups.

Cutting Data Log artwork
Engineers Toolsin testing

Cutting Data Log

Speeds, feeds and notes, by job and material.

Dividing Head artwork
Engineers Toolsin testing

Dividing Head

Simple, angular and differential indexing.

Drawing Symbols artwork
Engineers Toolsin testing

Drawing Symbols

GD&T and ISO GPS symbols in plain English.

Fabrication Cut List artwork
Engineers Toolsin testing

Fabrication Cut List

Frame and bar cut lists, mitre angles, kerf and stock.

Fastener Torque artwork
Engineers Toolsin testing

Fastener Torque

Tightening torque and preload, metric and UNC/UNF.

Gas & Rod Usage artwork
Engineers Toolsin testing

Gas & Rod Usage

Weld metal, wire or rod to buy, and shielding gas.

Gear Measure artwork
Engineers Toolsin testing

Gear Measure

Span over teeth and measurement over pins.

Grinding Wheel artwork
Engineers Toolsin testing

Grinding Wheel

Surface speed, maximum RPM and dressing starting points.

Hardness Convert artwork
Engineers Toolsin testing

Hardness Convert

HRC, HRB, HV, Brinell and Shore conversions.

Hole Pattern artwork
Engineers Toolsin testing

Hole Pattern

PCD, grid and slot coordinates for a DRO.

Hydraulic Cylinder artwork
Engineers Toolsin testing

Hydraulic Cylinder

Push and pull force, speed, flow and stroke volume.

Job Timer & Quote artwork
Engineers Toolsin testing

Job Timer & Quote

Time jobs, cost them and quote, offline.

Keyway & Spline artwork
Engineers Toolsin testing

Keyway & Spline

Parallel keys, keyways and straight-sided splines.

Knurl Calc artwork
Engineers Toolsin testing

Knurl Calc

Blank diameters that track, for form and cut knurls.

Lathe Change Gears artwork
Engineers Toolsin testing

Lathe Change Gears

Change-gear trains for metric and imperial threads.

Lifting & Slings artwork
Engineers Toolsin testing

Lifting & Slings

Sling angles, leg loads, WLL and shackles.

Material Cost artwork
Engineers Toolsin testing

Material Cost

Weight and job price for plate, bar and tube.

O-Ring & Seal ID artwork
Engineers Toolsin testing

O-Ring & Seal ID

Measure a worn O-ring, find the size.

Offcut Rack artwork
Engineers Toolsin testing

Offcut Rack

Leftover plate, bar and tube, and find a piece.

Pipe Cut artwork
Engineers Toolsin testing

Pipe Cut

Offsets, mitres, copes and wrap templates.

Press Fit Force artwork
Engineers Toolsin testing

Press Fit Force

Interference, press force and a hub stress check.

Pump & Pipe Flow artwork
Engineers Toolsin testing

Pump & Pipe Flow

Velocity, pressure loss and a rough pump head.

Rack, Pinion & Worm artwork
Engineers Toolsin testing

Rack, Pinion & Worm

Rack travel, worm ratio, centre distance and efficiency.

Rotary Table artwork
Engineers Toolsin testing

Rotary Table

Handwheel turns, equally spaced holes and arc milling.

Scale & Drawing Measure artwork
Engineers Toolsin testing

Scale & Drawing Measure

Real sizes from a scale rule, a known dimension or a photo.

Shaft Align artwork
Engineers Toolsin testing

Shaft Align

Reverse rim and rim-and-face, with shims.

Shop Plant Log artwork
Engineers Toolsin testing

Shop Plant Log

Service log, hours, next due and reminders.

Spindle Power artwork
Engineers Toolsin testing

Spindle Power

Cutting power and torque for turning and milling.

Spring Calc artwork
Engineers Toolsin testing

Spring Calc

Compression and extension spring rate and stress.

Surface Finish artwork
Engineers Toolsin testing

Surface Finish

Ra, Rz, N grades, CLA and turned finish.

Tap & Drill Chart artwork
Engineers Toolsin testing

Tap & Drill Chart

Tap drills for metric, UNC, UNF, BSP and BSW.

Taper ID artwork
Engineers Toolsin testing

Taper ID

Morse, Jacobs, R8, 7:24 and metric tapers.

Taper Turning artwork
Engineers Toolsin testing

Taper Turning

Tailstock set-over and compound-slide angle.

Thermal Expansion artwork
Engineers Toolsin testing

Thermal Expansion

Length and diameter growth, and shrink-fit temperatures.

Tool Life & Wear artwork
Engineers Toolsin testing

Tool Life & Wear

Taylor tool life and a plan for insert changes.