Trade Tools

Pipe Fall & Gradient

Fall, 1 in n, Part H.

in testingplumbersiteandroid

Falls for waste and soil pipes and drains: total fall from a gradient or the gradient from a fall, in mm per metre, percent and degrees, checked against the Approved Document H branch and drain guidance.

How it works, a worked example and screenshots ↓

Pay once, no subscription, no ads.

Platform
Android
Version
1.0
Source
Private source · Studio product
Price
£3.99

Runs on your phone, no internet needed. When it is on Google Play, updates will come through Play next time you're online.

Want to know when it launches? Email forestforge.dev@gmail.com.

Pipe Fall & Gradient artwork
Pipe Fall & Gradient app screen
Screenshot from the Android app

What it does

Pipe Fall & Gradient works out the fall from a gradient, or the gradient from a fall, for wastes and drains, and checks it against the usual Approved Document H guide for that pipe. It lists the invert level every 2 m along the run.

Who it's for

Plumbers, groundworkers and builders laying waste pipes and below-ground drains.

How to use it

  1. 1Choose the pipe: basin, bath, sink, WC branch or drain.
  2. 2Say whether you know the gradient or the fall.
  3. 3Enter the run length and the gradient (1 in n) or the total fall.
  4. 4Add the start invert level if you have one.
  5. 5Read the fall, mm per metre, angle and the levels along the run.

Inputs and outputs

You enter

  • Pipe type and size
  • Gradient 1 in n, or fall in mm
  • Run length (m)
  • Start invert level (m), optional

You get

  • Total fall and gradient
  • Fall per metre, percentage and angle
  • Whether it is within the guide for the pipe
  • Invert levels along the run

Worked example

A 100 mm drain carrying a WC

Given

  • 100 mm drain with a WC, 10 m run
  • Gradient 1 in 40

Working

  1. Fall = 10.00 ÷ 40 = 0.250 m
  2. Per metre = 1000 ÷ 40 = 25.0 mm
  3. Angle = atan(1 ÷ 40) = 1.43°

Result

250 mm fall over 10 m (2.5 %), within the guide (1:80 minimum with a WC).

An example only: your job will differ, so check the figures against the working in the app.

Features

  • Fall from gradient, or gradient from fall
  • Checked against Approved Document H guidance for each pipe
  • Invert levels along the run
  • Mm per metre, percentage and angle
  • Formulas and working shown, with a clear guide-only note
  • Copy, print to PDF, export JSON or open the result in the Plumber Suite
  • Works offline, no account, no ads

Screenshots

The tool with its starting values
The tool with its starting values
Formulas, working and the results panel
Formulas, working and the results panel

Guide only

Approved Document H guidance for England. A guide only: check against the regulations and Building Control. The app shows its formulas and working so you can check every figure. It is not a substitute for your own judgement, training or the published standards.

More plumber tools

All plumber tools